• Call +1.858.633.0165 or Fax +1.858.633.0166 or Contact Us

MCP-3 elisa kit :: Monocyte Chemotactic Protein-3 ELISA Kit

Scan QR to view Datasheet
Catalog # MBS590022
Unit / Price
  96 Wells  /  $605 +1 FREE 8GB USB
Typical Testing Data/Standard Curve (for reference only)
Product Name

Monocyte Chemotactic Protein-3 (MCP-3), ELISA Kit

Full Product Name

Monocyte Chemotactic Protein-3 (MCP-3)

Product Gene Name
Research Use Only
For Research Use Only. Not for use in diagnostic procedures.
Request for Current Manual Insert
3D Structure
ModBase 3D Structure for P80098
This sandwich ELISA can recognises both natural and recombinant human MCP-3. This kit exhibits no significant cross-reactivity with human IL-8, IL-1beta, SAA, RANTES, MCAF, EGF, TNF-alpha, TGF-beta, M-CSF, GM-CSF, FGF, and EPO.
Serum, plasma, Cell Culture Supernatant, and other biological fluids
Assay Type
The minimum detectable dose of MCP-3 was determined by adding two standard deviations to the mean optical density value of 20 zero standard replicates and calculating the corresponding concentration from the standard curve. The minimum detectable dose using a standard curve generated with Calibrator Diluent I is 30 pg/mL and using Calibrator Diluent II is 20 pg/mL.
Intra-assay Precision
To determine within-run precision, three different samples of known concentration were assayed by replicates of twenty in 1 assay.
Inter-assay Precision
To determine between-run precision, three different samples of known concentration were assayed by replicates on 20 different assays.
Intended Uses
This Human MCP-3 ELISA Kit is to be used for the in vitro quantitative determination of human monocyte chemotactic protein-3 (MCP-3) concentrations in serum, plasma, cell culture supernatant, and other biological fluids. This kit is intended for LABORATORY RESEARCH USE ONLY and is not for use in diagnostic or therapeutic procedures.
Product Note
Our ELISA Kit assays are dynamic research tools and sometimes they may be updated and improved. If the format of this assay is important to you then please request the current manual or contact our technical support team with a presales inquiry before placing an order. We will confirm the current details of the assay. We cannot guarantee the sample manual posted online is the most current manual.
Other Notes
Small volumes of MCP-3 elisa kit vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.
Searchable Terms forMCP-3purchase
MBS590022 is a ready-to-use microwell, strip-or-full plate ELISA (enzyme-linked immunosorbent assay) Kit for analyzing the presence of the Monocyte Chemotactic Protein-3 (MCP-3) ELISA Kit target analytes in biological samples. The concentration gradients of the kit standards or positive controls render a theoretical kit detection range in biological research samples containing MCP-3. The ELISA analytical biochemical technique of the MBS590022 kit is based on MCP-3 antibody-MCP-3 antigen interactions (immunosorbency) and an HRP colorimetric detection system to detect MCP-3 antigen targets in samples. The ELISA Kit is designed to detect native, not recombinant, MCP-3. Appropriate sample types may include undiluted body fluids and/or tissue homogenates, secretions. Quality control assays assessing reproducibility identified the intra-assay CV (%) and inter-assay CV(%).
Related Product Information for
MCP-3 elisa kit
Principle of the assay: This MCP-3 enzyme linked immunosorbent assay (ELISA) applies a technique called a quantitative sandwich immunoassay. The microtiter plate provided in this kit has been pre-coated with a monoclonal antibody specific for MCP-3. Standards or samples are then added to the appropriate microtiter plate wells and incubated. MCP-3, if present, will bind and become immobilised by the antibody pre-coated on the wells. The microtiter plate wells are thoroughly washed to remove unbound MCP-3 and other components of sample. In order to quantitate the amount of MCP-3 present in the sample, a standardised preparation of horseradish peroxidase (HRP)-conjugated monoclonal antibody specific for MCP-3 is added to each well to "sandwich" the MCP-3 immobilized during the first incubation. The microtiter plate then undergoes a second incubation. The wells are thoroughly washed to remove all unbound HRP-conjugated antibodies and a TMB (3,3'5,5' tetramethyl-benzidine) substrate solution is added to each well. The enzyme (HRP) and substrate are allowed to react over a short incubation period. Only those wells that contain MCP-3 and enzyme-conjugated antibody will exhibit a change in colour. The enzyme-substrate reaction is terminated by the addition of a sulphuric acid solution and the colour change is measured spectrophotometrically at a wavelength of 450 nm +/- 2 nm. In order to measure the concentration of MCP-3 in the samples, this kit includes two calibration diluents (Calibrator Diluent I for serum/plasma testing and Calibrator Diluent II for cell culture supernatant testing.) According to the testing system, the provided standard is diluted (2-fold) with appropriate Calibrator Diluent and assayed at the same time as the samples. This allows the operator to produce a standard curve of Optical Density (O.D.) versus MCP-3 concentration (pg/mL). The concentration of MCP-3 in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Typical Testing Data/Standard Curve (for reference only) of MCP-3 elisa kit
MCP-3 elisa kit Typical Testing Data/Standard Curve (for reference only) image
Sample Manual Insert of MBS590022. Click to request current manual
NCBI/Uniprot data below describe general gene information for MCP-3. It may not necessarily be applicable to this product.
NCBI Accession #
UniProt Primary Accession #
UniProt Secondary Accession #
Molecular Weight
11,200 Da
NCBI Official Full Name
monocyte chemotactic protein-3
UniProt Protein Name
C-C motif chemokine 7
UniProt Synonym Protein Names
Monocyte chemoattractant protein 3; Monocyte chemotactic protein 3; MCP-3; NC28; Small-inducible cytokine A7
UniProt Gene Name
UniProt Entry Name
UniProt Comments for MCP-3
CCL7: Chemotactic factor that attracts monocytes and eosinophils, but not neutrophils. Augments monocyte anti-tumor activity. Also induces the release of gelatinase B. This protein can bind heparin. Binds to CCR1, CCR2 and CCR3. Belongs to the intercrine beta (chemokine CC) family.

Protein type: Motility/polarity/chemotaxis; Secreted; Secreted, signal peptide

Chromosomal Location of Human Ortholog: 17q11.2-q12

Cellular Component: extracellular space; extracellular region

Molecular Function: heparin binding; CCR1 chemokine receptor binding; chemokine activity; CCR2 chemokine receptor binding

Biological Process: cellular calcium ion homeostasis; monocyte chemotaxis; regulation of cell shape; cell-cell signaling; eosinophil chemotaxis; response to gamma radiation; immune response; cytoskeleton organization and biogenesis; signal transduction; inflammatory response; chemotaxis; positive regulation of cell migration
All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.
While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.

It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.
Request a Quote

Please fill out the form below and our representative will get back to you shortly.

Contact Us

Please fill out the form below and our representative will get back to you shortly.