• Call +1.858.633.0165 or Fax +1.858.633.0166 or Contact Us

Mouse Heat Stable Enterotoxin Monoclonal Antibody

Scan QR to view Datasheet
Catalog # MBS834211
Unit / Price
Scan QR to view Datasheet
  0.5 mg  /  $375 +1 FREE 8GB USB
anti-Heat Stable Enterotoxin antibody
Product Name

Heat Stable Enterotoxin, Monoclonal Antibody

Full Product Name

Heat Stable Enterotoxin antibody

Product Synonym Names
Monoclonal Heat Stable Enterotoxin; Anti-Heat Stable Enterotoxin; Enterotoxin
Matching Pairs
Capture Antibody: Heat Stable Enterotoxin Clone #M120531 (MBS834211)
Detection Antibody: Heat Stable Enterotoxin Clone #M120529 (MBS832358)
Comments: Excellent pair for ELISA
Matching Pairs
Capture Antibody: Heat Stable Enterotoxin Clone #M120531 (MBS834211)
Detection Antibody: Heat Stable Enterotoxin Clone #M120530 (MBS834216)
Comments: Excellent pair for ELISA
Research Use Only
For Research Use Only. Not for use in diagnostic procedures.
Clonality
Monoclonal
Isotype
IgG1
Clone Number
M120531
Host
Mouse
Specificity
Specific to Heat-stable enterotoxin (STp)
Purity/Purification
> 95% pure
Heat Stable Enterotoxin antibody was purified by Protein A or G affinity purification
Form/Format
Supplied as a liquid in PBS, pH 7.4, 3mM KCl, 1.5mM KH2PO4, 140mM NaCl, 8.0mM Na2HPO4
Concentration
1-3 mg/ml (lot specific)
Biological Significance
Heat-stable enterotoxins (STs) are secretory peptides produced by some bacterial strains, such as enterotoxigenic Escherichia coli which are in general toxic to animals. These peptides keep their 3D structure and remain active at temperatures as high as 100 deg C. Different STs recognize distinct receptors on the surface of animal cells and thereby affect different intracellular signaling pathways. For example, STa enterotoxins bind and activate membrane-bound guanylate cyclase, which leads to the intracellular accumulation of cyclic GMP and downstream effects on several signaling pathways. These events lead to the loss of electrolytes and water from intestinal cells.
Biohazard Information
This product contains sodium azide as a preservative. Although the amount of sodium azide is very small appropriate care must be taken when handling.
Immunogen
Heat Stable Enterotoxin antibody was raised in mouse using STp peptide (18 amino acid length) coupled with KLH to the N terminal or C terminal, respectively as the immunogen.
Preparation and Storage
Store at 4 degree C for short term or -20 degree C for longer storage. Avoid repeated freeze/thaw cycles.
Other Notes
Small volumes of anti-Heat Stable Enterotoxin antibody vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.
Related Product Information for
anti-Heat Stable Enterotoxin antibody
Mouse monoclonal Heat Stable Enterotoxin antibody
Applications Tested/Suitable for anti-Heat Stable Enterotoxin antibody
ELISA (EIA)
MBS834211 can be used as the capture antibody with either MBS832358 or MBS834216 as the detection antibody in ELISA
NCBI/Uniprot data below describe general gene information for Heat Stable Enterotoxin. It may not necessarily be applicable to this product.
NCBI GI #
NCBI Accession #
Molecular Weight
NCBI Official Full Name
heat stable enterotoxin, partial
UniProt Protein Name
Heat stable enterotoxin
UniProt Synonym Protein Names
Heat stable enterotoxin
UniProt Entry Name
Q6BCH1_EDWIC
Precautions
All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.
Disclaimer
While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.

It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.
Request a Quote

Please fill out the form below and our representative will get back to you shortly.

MBS000000
Contact Us

Please fill out the form below and our representative will get back to you shortly.

MBS000000