• Call +1.858.633.0165 or Fax +1.858.633.0166 or Contact Us

anti-HA antibody :: Rabbit anti-General Hyaluronic Acid (HA) Polyclonal Antibody

Scan QR to view Datasheet
Catalog # MBS2014695 (SPECIAL PROMOTION: Get FREE $5 Starbucks gift card (Maximum 5 gift cards/product). Gift card(s) will be included with shipment)
Unit / Price
  0.01 mg  /  $110 +1 FREE 8GB USB
  0.02 mg  /  $130 +1 FREE 8GB USB
  0.05 mg  /  $185 +1 FREE 8GB USB
  0.1 mg  /  $235 +1 FREE 8GB USB
  0.2 mg  /  $355 +1 FREE 8GB USB
  1 mg  /  $840 +1 FREE 8GB USB
Product Name

Hyaluronic Acid (HA), Polyclonal Antibody

Popular Item
Also Known As

FITC-linked Antibody to Hyaluronic Acid (HA)

Product Gene Name
Matching Pairs
Unconjugated Antibody: Hyaluronic Acid (HA) (MBS2003855)
FITC Conjugated Antibody: Hyaluronic Acid (HA) (MBS2014695)
Research Use Only
For Research Use Only. Not for use in diagnostic procedures.
Clonality
Polyclonal
Host
Rabbit
Species Reactivity
General
Specificity
The antibody is a rabbit polyclonal antibody raised against hyaluronic acid. It has been selected for its ability to recognize hyaluronic acid in immunohistochemical staining and western blotting.
Form/Format
Supplied as solution form in PBS, pH7.4, containing 0.02% NaN3, 50% glycerol.
Concentration
100ug/ml (lot specific)
UOM
100~g
Unconjugated Antibody
The unconjugated antibody version of this item is also available as catalog #MBS2003855
Preparation and Storage
Store at 4 degree C for frequent use. Stored at -20 degree C to -80 degree C in a manual defrost freezer for one year without detectable loss of activity. Avoid repeated freeze-thaw cycles.
Note: As fluorescence can photobleach when exposed to light, so the antibody must be protected from light.
Other Notes
Small volumes of anti-HA antibody vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.
Product Categories/Family for anti-HA antibody
Applications Tested/Suitable for anti-HA antibody
WB, ICC, IHC-P, IHC-F, ELISA
Application Notes for anti-HA antibody
Western blotting: 1: 1 00-400
Immunocytochemistry in formalin fixed cells: 1: 1 00-500
Immunohistochemistry in formalin fixed frozen section: 1: 1 00-500
Immunohistochemistry in paraffin section: 1 :50-200
Enzyme-linked Immunosorbent Assay: 1:100-200
Optimal working dilutions must be determined by end user.

Structural Formula of anti-HA antibody
anti-HA antibody Structural Formula image
SDS-PAGE of anti-HA antibody
[ DESCRIPTION]
Effective Size Range: 10kDa to 70kDa.
Protein bands: 10 kDa, 14 kDa, 18 kDa, 22 kDa, 26 kDa, 33 kDa, 44 kDa and 70 kDa.
Double intensity bands: The 26 kDa, 18 kDa, 10 kDa bands are at double intensity to make location and size approximation of proteins of interest quick and easy.
Ready-to-use: No need to heat, dilute or add reducing agents before use.
[ STORAGE BUFFER]
62.5mM Tris-H3P04 (pH 7.5 at 25°C), 1 mM EDTA, 2% (w/v) SDS, 100mM DTT, 1 mM NaN3, 0.01 % (w/v) bromo-phenol blue and 33% (v/v) glycerol.
[APPLICATION]
Accurate protein sizing on SDS-polyacrylamide gels and Western blots.
[USAGE]
1. Allow the Marker to reach room temperature and thoroughly mix before use. This will ensure that any solids that may have precipitated at -20°C have returned to solution. Do not boil!
2. Load the following volumes of the Marker on a SDS-polyacrylamide gel.
[ LOADING VOLUMES]
3~5uL per well for mini gel; 7uL per well for large gel.
Use the same volumes for Western blotting applications. The loading volumes listed above are recommended for gels with a thickness of 0.75~1.0mm. The loading volume should be double for 1.5mm thick gels.
[ QUALITY CONTROL]
The protein marker, with molecular weight shifts of < or = 5% and minimal band broadening, are confirmed by migration in SDS-PAGE system. Electrophoresis of the Marker on a 13~18% Tris-glycine SDS-polyacrylamide gel resolves 8 individual bands.
[IMPORTANT NOTES]
1. The protein marker is conveniently packaged and ready to use. There is no need to heat, dilute or add reducing agents. Do not boil, which may cause band degradation.
2. The molecular weights of the proteins have a lot-to-Iot variation of ~5%.
3. These protein markers are for SDS-PAGE and should not to be used for native electrophoresis or a native gel. These markers are denatured and have SDS in the storage buffer.
4. Don't load too much protein. See recommended load volumes in the manual.
5. Check % gel that is being used if the lands miss. Depending on gel type and/or percentage, you may not see all of the bands. For example, one would not see the smallest bands of the standard on a very low % gel. A high % gel may not resolve the higher MW bands. Homogeneous low percentage gels are recommended for analysis of large proteins and high percentage gels for analysis of small proteins. In high percentage gels (13~18%) large proteins (22~70kDa) can separate, while in low percentage gels (4~8%) small proteins (14 and 10kDa) will migrate with the tracking dye. Longer transfer times or higher transfer voltages may be required for Western blotting of large (>100kDa) proteins.
6. If additional bands are observed in the gel image of the protein ladder, this might be caused by Dn oxidation in the storage buffer.
7. If proteins show a poor transfer, increase voltage, current or length of time for transfer, and pay attention to the SDS from the transfer buffer. SDS will cause the proteins to bind less efficiently to membranes because it disrupts the hydrophobic interaction between the membrane and the protein. If SDS is present in transfer buffer, make sure that there is no more than 0.02% in buffer.
8. Alcohol enhances hydrophobic binding to membrane. Not enough alcohol may prevent binding.
[ SHELF LIFE]
Storage: -20 degree C, 1 year at -20 degree C. If the product has been stored as directed for one year, its shelf life maybe extended by adding dithiothreitol (Dn) to approximately 50mM.
anti-HA antibody SDS-PAGE image
Protein Family
Precautions
All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.
Disclaimer
While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.

It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.
Request a Quote

Please fill out the form below and our representative will get back to you shortly.

MBS000000
Contact Us

Please fill out the form below and our representative will get back to you shortly.

MBS000000