Antibody Protein ELISA Kit from MyBioSource header Telephone 1.858.633.0165          
1.855.MyBioSource
Fax 1.858.633.0166    Email sales@mybiosource.com 
tel/fax
menu1 Home Products Ordering Company Help menu7
bottom
   MyBioSource rightarrow Antibody rightarrow Kv1.1 K+ channel rightarrow Monoclonal Kv1.1 K+ channel  rightarrow LOG IN  rightarrow MY ACCOUNT  rightarrow CART CONTENTS  rightarrow CHECKOUT 
horiz bar
MyBioSource Menu separator
separator
ELISA Kit ELISA Kit
CLIA Kit CLIA Kit
PCR Kit PCR Kit
Monoclonal Antibody Monoclonal Antibody
Polyclonal Antibody Polyclonal Antibody
Secondary Antibody Secondary Antibody
Antigen Antigen
Biochemical Biochemical
cDNA Clone cDNA Clone
siRNA siRNA
Peptide Peptide
Recombinant/Purified Protein Rec./Purified Protein

Custom ELISA Kit Custom ELISA Kit
Custom Protein Custom Protein
Custom Antibody Custom Antibody
Antibody Matched Pairs Antibody Matched Pairs
Antibody & Corresponding Blocking Peptide Pairs Antibody Peptide Pairs
Phospho-Specific Antibodies Phospho Antibodies
Products by Disease Products by Disease
Products by Pathway Products by Pathway
Products by Tissue Products by Tissue

arrow Advanced Search
arrow Submit Technical Q&A
arrow International Distributors
arrow Contact Us
separator
Our Best Sellers moreseparator
separator
 • L-2-hydroxyglutarate dehydrogenase (L2HGDH) ELISA Kit
 • Histone Deacetylase (HD) ELISA Kit
 • INHBP ELISA Kit
 • 11 beta hydroxysteroid dehydrogenase type 1 (11beta-HSD1) (H... ELISA Kit
 • Dehydroepiandrosterone (DHEA) ELISA Kit
 • TFAM Recombinant Protein
 • 182 kDa tankyrase-1-binding protein (Tnks1bp1) Recombinant Protein
 • Cytochrome P450 (CYP450) ELISA Kit
 • Soluble Platelet-Selectin (SP-SELECTIN) ELISA Kit
 • MAST1 Antibody
 • hs-CRP ELISA Kit
 • prostaglandin D2 synthase 21kDa (brain) (PTGDS) ELISA Kit
 • Cell division control protein 2 cognate (cdc2c) Recombinant Protein
 • TMEM154 Antibody
 downarrow more ...
separator
separator
DatasheetFull DatasheetPrinter Friendly DatasheetPrint This DatasheetAdd to Compare ListHave Questions? Ask UsRequest for a Quotation today

Mouse Kv1.1 K+ channel Monoclonal Antibody

Scan QR to view Datasheet Catalog #    MBS555823 anti-Kv1.1 K+ channel antibody
Unit / Price
0.1 mL  /  $470 +1 FREE 8GB USB
 
 Go to:   rightarrow  Product Names   rightarrow Product Info   rightarrow Accession #s   rightarrow Product Desc   rightarrow Diseases/Tissues/Pathways   rightarrow Applications   rightarrow References 
 Product Name   

Kv1.1 K+ channel, Monoclonal Antibody

 Also Known As   

Kv1.1 K+ channel

 Research Use Only    For Research Use Only. Not for use in diagnostic procedures.
Table BarTOPTable Bar
 Clonality    Monoclonal
 Isotype    IgG
 Host    Mouse
 Species Reactivity    Rat, Mouse, Human
Section Bar
 Purity/Purification    Affinity Purified
 Form/Format    Liquid. Purified Antibody in PBS.
 Concentration    1 mg/ml (lot specific)
Section Bar
 Immunogen    Synthetic peptide amino acids 458-476 (cytoplasmic C-terminus) of rat Kv1.1 (EEDMNNSIAHYRQANIRTG; accession number P10499).
 Immunogen Sequence    Synthetic peptide amino acids 458-476 (cytoplasmic C-terminus) of rat Kv1.1 (EEDMNNSIAHYRQANIRTG; accession number P10499).
 Immunostaining Cell Cultures    1. Draw of culture medium with aspirator and add 1 ml of 3.7 % formalin in PBS solution to the dish. (make up from 10mls Fisher 37% formalin plus 90mls PBS, the Fisher formalin contains 37% formaldehyde plus about 1% methanol which may be relevant sometimes). Let sit at room temp for 1 minute. (can add 0.1% Tween 20 to PBS used here and all subsequent steps to reduce background; probably best not to do this first time round though as it may extract your antigen or help wash your cells off the dish).
2. Take off the formalin/PBS and add 1ml of cold methanol (-20 degree C, kept in well sealed bottle in fridge). Let sit for no more than 1 minute.
3. Take off methanol and add 1ml of PBS, not letting the specimen dry out. To block nonspecific antibody binding can add ~10ml (=1%) of goat serum (Sigma), and can incubate for 30 minutes. Can then add antibody reagents. Typically 100ml of hybridoma tissue culture supernatent or 1ml of mouse ascites fluid or crude serum. Incubate for 1 hour at room temp. (or can go at 37 degree C for 30 minutes to 1 hour, or can do 4 degree C overnight, exact time not too critical). Can do very gentle shaking for well adherent cell lines (3T3, Hek293 etc.).
4. Remove primary antibody and replace with 1 ml of PBS. Let sit for 5-10 minutes, replace PBS and repeat twice, to give three washes in PBS.
5. Add 0.5 mls of secondary antibody. These are fluorescently labeled Goat anti mouse antibodies and are conjugated to ALEXA dyes and are from Molecular probes (Eugene Oregon, the ALEXA dyes are sulphonated rhodamine compounds and are much more stable to UV than FITC, TRITC, Texas red etc.). Typically make 1:2,000 dilutions of these secondaries in PBS plus 1% goat serum, BSA or non fat milk carrier. Incubate for 1 hour at room temp. (or can go at 37 degree C for 30 minutes to 1 hour, or can do 4 degree C overnight). Can do gentle shaking for well adherent cell lines (3T3, HEK293 etc.).
6. Remove secondary antibody and replace with 1 ml of PBS. Let sit for 5-10 minutes, replace PBS and repeat twice, to give three washes in PBS.
7. Drop on one drop of Fisher mounting medium onto dish and apply 22mm square coverslip. View in the microscope
 !Immunostaining Tissue    Solutions
PBS-sodium phosphate-buffered (100 mM; pH 7.2) isotonic (0.9% NaCl, w/v) saline Antibody dilution buffer (PBS with 0.1% non-ionic detergent, such as Triton X-100 or Tween-20) fluorescein anti-fading reagent -- Make up a 2 mg/ml phenylene diamine solution in PBS (phenylene diamine requires extensive vortexing to put it into solution). Once the phenylene diamine is completely dissolved, add an equal volume of glycerol and mix. This reagent will last about a week at - 20 degree C Discard this reagent when it starts to turn dark brown. Other Reagents
Fluorescein-labeled goat anti-mouse IgG.
1. Prepare your tissue sections or cultured cells as you normally would. Wash your sections or cells for 1 min with PBS at room temperature.
2. Incubate your sections or cells with your chicken primary antibodies (diluted in "antibody dilution buffer") for at least 1 hour at room temperature. The concentration of your antibody may be anywhere from 1:50-1:150 depending on the titre of the antibody and the concentration of your antigen.
3. Wash your sections or cells over a 10 minute period at room temperature (with two changes of PBS).
4. Incubate your sections or cells with fluorescein-labeled goat anti-mouse IgG (1:500 dilution in "antibody dilution buffer" for 1 hour at room temperature. Be sure to keep these slides or culture dishes in subdued light (e.g., in a drawer) to avoid bleaching of the fluorescein dye.
5. Repeat step #4
6. Add a drop of "fluorescence anti-fading reagent" (i-BRITE Plus) to your sections or cells. Place a coverslip over the section. If you want to reduce messiness, you may also seal the coverslip by painting the edges with nail polish.
7. Store the slides or culture dishes in the refrigerator (in the dark).
 Western Blot Protocol    1. Run gel as usual. Take gel out of electrophoresis apparatus. Cut into segments as required; Part of gel can be stained directly in Coomassie brilliant blue R-250 (2.5 g Coomassie Brilliant Blue R-250, 450 mls methanol, 100 mls glacial acetic acid, water to 1 liter). Part to be used for electroblotting is put into tap water on shaker, after first having marked it unambiguously to identify top/bottom, left and right etc.
2. Leave in water on shaker for 5 minutes. This step can be substituted by washing the gel in electro-transfer buffer (see below) for 5 minutes.
3. We use a semidry blotter, which we have found to be quicker, more economical and easier than fully submerged blotting methods. We cut Whatman 3M filter papers to the size of our gels, and place three of these onto the semi dry blotter. These are then wet with transfer buffer (we routinely use 3.03 g Tris base, 14.4 g Glycine, 10% Methanol per liter). The gel is put onto the filters and a prewetted nitrocellulose filter is put ontop of the gel. Alternately put a PVDF membrane on top; if you are using PVDF remember it is essential to prewet the PVDF in 100% methanol. Great care should be taken to ensure that no air bubbles are anywhere in this stack of membranes. Then three more wetted Whatman 3M filters should be placed ontop of the pile, again taking great care not to have any bubbles in pile. Put the top onto the apparatus and screw it down. Proteins in transfer buffer are negative in charge mostly due to residual SDS and they therefore move from -ve to +ve pole. So the +ve electrode is above the nitrocellulose and the -ve side is below the gel.
4. Run for 30 minutes to 1 hour at ~100mA. The most reliable way of doing this is to use a powerful power supply 200- 500mA and put it on constant voltage, with a setting of 5 to 10 Volts. Low molecular weight proteins (20kDa or less) will transer in 30 minutes at 5 Volts, while higher molecular weight (150kDa or more) transfer in 60 minutes at 10 Volts. 5. After running disassemble the apparatus and remove nitrocellulose filter. Stain this for 5 minutes on shaker in Ponceau reagent (0.25% Ponceau S in 40% methanol and 15% acetic acid). Destain with regular SDS-PAGE gel destain solution (7.5% methanol, 10% acetic acid). If you transferred efficiently, the proteins can be seen as pale pink bands. This tells you whether the transfer was O.K. or not and also exactly where the bands are. You can photograph, photocopy or mark the position of the bands directly with a pencil. If you can't see any bands at this stage, it's probably smart to try to optimize steps 3 and 4. The gel may be discarded or may be stained as usual in coomassie, to see how much protein is left behind.
6. After Ponceau staining put the nitrocellulose filter into blocking solution, such as 1% bovine serum albumin (BSA) or 1% Carnation non fat milk (NFM), for 20 minutes to 1 hr at RT or 37 degree C. Since the NFM works just as well as BSA but is much cheaper, there is really no good reason to use BSA. Ponceau staining will fade to become completely invisible. Carry on with antibody incubations etc.
Antibody Incubations:
1. Put in antibody solutions. Volume should be enough to cover blot and allow it to float freely when you agitate. In initial experiments, antibody concentration should generally be about 1:100-1:1,000 for ascites, CL350 tissue culture supernatant or antiserum, undiluted to 1:10 for monoclonal supernatant, and about 1-10mug/ml for a pure IgG. If dilution brings antibody concentration to less than 50 mugs/ml, add some BSA or NFM to act as carrier protein (e.g. make BSA or NFM concentration 1mg/ml). Incubate for at least 1 hour with shaking (can be room temperature or at 37 degree C, can also do overnight at 4 degree C).
2. Wash membranes in TBS (10mM Tris, 154mM NaCl, pH=7.5 plus 0.1% Tween 20) for 3 times at least five minutes each time with extensive agitation.
3. Incubate in second antibody (peroxidase-conjugate, phosphatase conjugate or radioactive). Add BSA or NFM carrier as before if necessary. Incubate for at least one hour at room temperature or 37 degree C can also do overnight at 4 degree C with shaking as before.
4. Wash membranes in TBS (10mM Tris, 154mM NaCl, pH=7.5 plus 0.1% Tween 20) for 3 times at least five minutes each time with extensive agitation.
A. Alkaline Phosphatase Blot System
1. Incubate in alkaline phosphatase conjugated antibody against the primary antibody (e.g. Goat anti-mouse, rabbit or chicken; buy from Sigma or some other trusted source). Typical concentration is 1:1,000 in TBS (10mM Tris/HCl, 154mM NaCl, pH=7.5). Add a small amount of BSA or NFM to act as carrier. Incubate for 1 hour at room temperature (or 37 degree C) with shaking.
2. Wash in TBS three times 5 minutes each. (N.B. the alkaline phosphatase enzyme is inhibited by EDTA, which chelates zinc and magnesium, and by phosphate, which inhibits forward reaction. Make sure therefore you use TBS which is EDTA and phosphate free- Don't make up developer in PBS!)
3. Put into developer. Buffer is 100mM Tris/HCl, 100mM NaCl, 5mM MgCl2 pH=9.5. To 10ml of this add 33mul BCIP-T (5- bromo-4-chloro-3-indolyl phosphate, p-toluidine salt, make up 50mg/ml in water or Dimethyl formamide; in water makes a yellow suspension) and 33mul of NBT (Nitro Blue Tetrazolium, also 50mg/ml in water). Can store these solutions at -20 degree C.
Can buy this solution made up already from Sigma. Reaction product is purple, and appears in a few minutes; can incubate for up to an hour if the signal is weak. Watch development of reaction and stop with water. Some of background disappears on drying. B. Horse Radish Peroxidase Staining
After washing of blots in TBS or PBS (must not have azide in wash buffer! This inhibits the peroxidase enzyme) add reaction mixture. This is; 20 mls 0.1M Tris/HCl pH=7.2 (Vecta stain buffer). 200 mul NiCl (80 mg/ml), 6 mul 30% hydrogen peroxide, 1ml of 5mgs/ml diaminobenzidine. (Wear gloves, DAB is carcinogenic). Alternate protocol; Make 20 mls ammonium acetate buffer (50mM, pH=5.0). Add 1 ml of 10mg/ml Diaminobenzidine, 40mul 30% hydrogen peroxide. Brown reaction product is seen in 1-10 minutes, not quite so nice as above method. C. Chemiluminescence Staining
Chemiluminescence has an advantage of perhaps an order of magnitude greater sensitivity than the dye based methods above. In addition, several films may be exposed from a single blot, giving an advantage in interpretation of weak and strong signals on the same membrane. However it requires a darkroom to perform and is more expensive in reagents. Reagents are generally bought in a kit, and we recommend simply following the kit instructions.
Section Bar
 Preparation and Storage    Can be aliquoted and stored frozen at -20 degree C to -70 degree C in a manual defrost freezer for six months without detectable loss of activity.
The antibody can be stored at 2 degree to 8 degree C for 1 month without detectable loss of activity. Avoid repeated freeze-thaw cycles.
 Other Notes    Small volumes of anti-Kv1.1 K+ channel antibody vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.
Table BarTOPTable Bar
 Applications Tested/Suitable for anti-Kv1.1 K+ channel antibody   

Immunocytochemistry (ICC), Western Blot (WB), Immunohistochemistry (IHC), Immunoprecipitation (IP)

 Application Notes for anti-Kv1.1 K+ channel antibody    IHC: 1:100-1,000
IP: 1:100-1,000
WB: 1:100-1,000
Table BarTOPTable Bar
 Precautions    All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.
 Disclaimer    While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.

It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.
Table BarTOPTable Bar
horiz bar
 SSL   Follow us on Facebook Follow us onTwitter Follow us on Google Plus Connect us on LinkedIn Subscribe to our RSS Feed for latest products and special promotions