• Call +1.858.633.0165 or Fax +1.858.633.0166 or Contact Us

ZW10 Antibody – Rabbit Polyclonal

For Research Use Only. Not for use in diagnostic procedures. Catalog #: MBS1755333

Centromere/kinetochore protein zw10 homolog is a protein that in humans is encoded by the ZW10 gene This gene encodes a protein that is one of many involved in mechanisms to ensure proper chromosome segregation during cell division. This protein is an… More details

$210 / 0.01 mg +1 FREE 8GB USB
Product Documentation
PDF
Sample Manual Insert View PDF
PDF
Testing Data View PDF
PDF
Certificate of Analysis (COA) View PDF
PDF
QC Report View PDF
PDF
Material Safety Data Sheet View PDF
PDF
Technical Datasheet View PDF
PDF
Protocol View PDF

Product Overview

Online Datasheet in PDF
Product Name
ZW10, Polyclonal Antibody
Full Product Name
Anti-ZW10 Antibody Picoband
Product Gene Name
Clonality
Polyclonal
Isotype
Rabbit IgG
Host
Rabbit
Species Reactivity
Human
Form/Format
Lyophilized
Each vial contains 4 mg Trehalose, 0.9 mg NaCl, 0.2 mg Na2HPO4.
Purity/Purification
Immunogen affinity purified.
Concentration
Adding 0.2 ml of distilled water will yield a concentration of 500 ug/ml. (lot specific)
Preparation and Storage
Store at -20 degree C for one year from date of receipt. After reconstitution, at 4 degree C for one month. It can also be aliquotted and stored frozen at -20 degree C for six months. Avoid repeated freezing and thawing.
OMIM
603954
3D Structure
ModBase 3D Structure for O43264
Reconstitution
Adding 0.2 ml of distilled water will yield a concentration of 500 ug/ml.
Immunogen
E Coli-derived human ZW10 recombinant protein (Position: K35-K779).
ISO Certification
Manufactured in an ISO 13485:2003 and EN ISO 13485:2012 Certified Laboratory.
Applications Tested/Suitable for anti-ZW10 antibody
Western Blot (WB), Flow Cytometry (FC/FACS), ELISA (EIA)
Application Notes for anti-ZW10 antibody
WB: 0.25-0.5 ug/ml, Human
FC/FACS: 1-3 ug/1x10^6 cells, Human
Direct ELISA: 0.1-0.5 ug/ml, Human
Tested Species: In-house tested species with positive results.
Enhanced Chemiluminescent Kit with anti-Rabbit IgG (#MBS176460) for Western blot.

Western Blot (WB) of anti-ZW10 antibody

Figure 1. Western blot analysis of ZW10 using anti-ZW10 antibody (MBS1755333).

Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel)/90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30 ug of sample under reducing conditions.

Lane 1: human Hela whole cell lysates,
Lane 2: human K562 whole cell lysates,
Lane 3: human Jurkat whole cell lysates,
Lane 4: human CACO-2 whole cell lysates,
Lane 5: human HL-60 whole cell lysates.

After electrophoresis, proteins were transferred to a nitrocellulose membrane at 150 mA for 50-90 minutes. Blocked the membrane with 5% non-fat milk/TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-ZW10 antigen affinity purified polyclonal antibody (#MBS1755333) at 0.5 ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for ZW10 at approximately 95 kDa. The expected band size for ZW10 is at 89 kDa.
Rabbit Anti-ZW10 Polyclonal Antibody – Cat# MBS1755333

Flow Cytometry (FC/FACS) of anti-ZW10 antibody

Figure 2. Flow Cytometry analysis of 293T cells using anti-ZW10 antibody (MBS1755333).

Overlay histogram showing 293T cells stained with MBS1755333 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-ZW10 Antibody (MBS1755333, 1 ug/1x10^6 cells) for 30 min at 20 degree C. DyLight488 conjugated goat anti-rabbit IgG (MBS177405, 5-10 ug/1x10^6 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1 ug/1x10^6) used under the same conditions. Unlabelled sample (Red line) was also used as a control.
Rabbit Anti-ZW10 Polyclonal Antibody, Flow Cytometry (FC/FACS) – Cat# MBS1755333

Other Notes

Small volumes of anti-ZW10 antibody vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.

Searchable Terms for ZW10 purchase

MBS1755333 is an antibody targeting ZW10. Also known as Anti-ZW10 Antibody Picoband. Reactive in Human. Host: Rabbit.

Additional Details

NCBI/Uniprot data below describe general gene information for ZW10. It may not necessarily be applicable to this product.

UniProt Primary Accession #
UniProt Protein Name
Centromere/kinetochore protein zw10 homolog
UniProt Gene Name
ZW10
UniProt Entry Name
ZW10_HUMAN

UniProt Comments for ZW10

ZW10: Essential component of the mitotic checkpoint, which prevents cells from prematurely exiting mitosis. Required for the assembly of the dynein-dynactin and MAD1-MAD2 complexes onto kinetochores. Involved in regulation of membrane traffic between the Golgi and the endoplasmic reticulum. Belongs to the ZW10 family.

Protein type: Cell cycle regulation

Chromosomal Location of Human Ortholog: 11q23.2

Cellular Component: kinetochore microtubule; kinetochore; spindle pole; endoplasmic reticulum membrane; membrane; endoplasmic reticulum; cytoplasm; cytosol; nucleus

Molecular Function: centromeric DNA binding; protein binding

Biological Process: meiosis; ER to Golgi vesicle-mediated transport; protein transport; mitotic sister chromatid segregation; establishment of mitotic spindle orientation; cell division; mitotic cell cycle checkpoint; regulation of exit from mitosis; protein complex assembly; mitotic cell cycle; mitotic metaphase plate congression; Golgi organization and biogenesis
Show more

Precautions

All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.

Disclaimer

While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.

It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.

Product Note

Select online data sheet information is drawn from bioinformatics databases, occasionally resulting in ambiguous or non-relevant product information. It is the responsibility of the customer to review, verify, and evaluate the information to make sure it matches their requirements before purchasing the kit. Our ELISA Kit assays are dynamic research tools and sometimes they may be updated and improved. If the format of this assay is important to you then please request the current manual or contact our technical support team with a presales inquiry before placing an order. We will confirm the current details of the assay. We cannot guarantee the sample manual posted online is the most current manual, it is intended to serve as an example only. Please refer to the instructions For Use provided with the assay kit for precise details.
Request a Quote

Please fill out the form below and our representative will get back to you shortly.

MBS000000
Contact Us

Please fill out the form below and our representative will get back to you shortly.

MBS000000