• Call +1.858.633.0165 or Fax +1.858.633.0166 or Contact Us

CD8 Antibody – Monoclonal

For Research Use Only. Not for use in diagnostic procedures. Catalog #: MBS224404

MBS224404 is an antibody targeting CD8. Also known as MOUSE ANTI RABBIT CD8. More details

$455 / 0.1 mg +1 FREE 8GB USB
Product Documentation
PDF
Sample Manual Insert View PDF
PDF
Testing Data View PDF
PDF
Certificate of Analysis (COA) View PDF
PDF
QC Report View PDF
PDF
Material Safety Data Sheet View PDF
PDF
Technical Datasheet View PDF
PDF
Protocol View PDF

Product Overview

Online Datasheet in PDF
Product Name
CD8, Monoclonal Antibody
Full Product Name
MOUSE ANTI RABBIT CD8
Product Gene Name
Clonality
Monoclonal
Isotype
IgG1
Clone Number
12.C7
Form/Format
Purified IgG - liquid; Phosphate buffered saline
Concentration
Approx. Protein Concentrations: IgG concentration 1.0 mg/ml (lot specific)
Specificity
Mouse anti Rabbit CD8 antibody, clone 12.C7 recognizes the rabbit CD8 cell surface antigen, expressed by a subset of T lymphocytes with cytotoxic/suppressor activity.
Preparation and Storage
It is recommended to aliquot and store at -20 degrees C on date of receipt. When tahwed , aliquot the sample as needed. Keep aliquots at 2-8 degrees C for short term use (up to 4 weeks) ans store the ramining aliquots at -20 degrees C.

Avoid repeated freezing and thawing as this may denature the antibody. Storage in frost-free freezers is not recommended.
Target Species
Rabbit
Preparation
Purified IgG prepared by affinity chromatography on protein A from tissue culture supernatant.
Preservative Stabilizers
0.09% Sodium Azide (NaN3)
Carrier Free
Yes
Applications Tested/Suitable for anti-CD8 antibody
Flow Cytometry (FC)
Application Notes for anti-CD8 antibody
FC: 1/100 - 1/200

Flow Cytometry Use 10ul of the suggested working dilution to label 106 cells in 100ul.
Where this antibody has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures. Suggested working dilutions are given as a guide only. It is recommended that the user titrates the antibody for use in their own system using appropriate negative/positive controls.

Fluorescein Isothiocyanate (FITC) of anti-CD8 antibody

Rabbit peripheral blood lymphocytes stained with Mouse anti Rabbit CD8 (MBS224404) followed by Goat anti Mouse IgG (H/L): FITC ( MBS235142 )
Anti-CD8 Monoclonal Antibody – Cat# MBS224404

Fluorescein Isothiocyanate (FITC) of anti-CD8 antibody

Published researcher image:
Mouse anti Rabbit CD8 antibody, clone 12.C7 (MBS224404) used for the evaluation of CD8 expression on cells from lymph nodes and spleen from rabbits infected with alcelaphine herpesvirus 1 by flow cytometry.
Image caption:
Analysis of in vivo BrdU incorporation. Rabbits were treated as described in Fig. 1. PBMCs were collected at days 11, 15, 17, 20 and 24 post-inoculation, while mononuclear cells were isolated from popliteal lymph node and spleen at the time of death. Cells were labelled with anti-CD11b, IgM, CD5, CD4 and CD8 mAbs as the primary antibodies. Alexa 633-GAM was used as the secondary antibody.
In vivo BrdU incorporation was revealed by immunofluorescent staining as described in Methods. After staining, cells were analysed by flow cytometry.
A. Representative flow cytometry dot plots are shown for each double staining, they illustrate the data obtained at day 17 post-infection for the PBMC of rabbits MR17/1 and IR17/1. The data represent the percentages of BrdU positive cells (y-axis) calculated based on the acquisition of 10,000 cells expressing the indicated cell marker (x-axis).
B. The percentage of BrdU positive cells amongst the indicated cellular subset was determined and compared between AlHV-1 infected (left column: bold lines; middle and right columns: hatched bars) and mock infected (left column: dotted lines; middle and right columns: open bars) groups (* P<0.05; **P<0.005, *** P<0.0001). In the left column the following symbols were used: small closed triangle, MR17/1 and IR17/1; small open square, MR17/2 and IR17/2; small closed circle, MR20 and IR20; large open circle, MR24 and IR24.
Anti-CD8 Monoclonal Antibody, Fluorescein Isothiocyanate (FITC) – Cat# MBS224404

Other Notes

Small volumes of anti-CD8 antibody vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.

Additional Details

NCBI/Uniprot data below describe general gene information for CD8. It may not necessarily be applicable to this product.

Protein Family

Precautions

All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.

Disclaimer

While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.

It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.

Product Note

Select online data sheet information is drawn from bioinformatics databases, occasionally resulting in ambiguous or non-relevant product information. It is the responsibility of the customer to review, verify, and evaluate the information to make sure it matches their requirements before purchasing the kit. Our ELISA Kit assays are dynamic research tools and sometimes they may be updated and improved. If the format of this assay is important to you then please request the current manual or contact our technical support team with a presales inquiry before placing an order. We will confirm the current details of the assay. We cannot guarantee the sample manual posted online is the most current manual, it is intended to serve as an example only. Please refer to the instructions For Use provided with the assay kit for precise details.
Request a Quote

Please fill out the form below and our representative will get back to you shortly.

MBS000000
Contact Us

Please fill out the form below and our representative will get back to you shortly.

MBS000000