• Call +1.858.633.0165 or Fax +1.858.633.0166 or Contact Us

TMB Accessory Reagent

For Research Use Only. Not for use in diagnostic procedures. Catalog #: MBS239235

MBS239235 is an accessory reagent targeting TMB. Also known as TMB SENSITIVE. More details

DISCONTINUED
Click here to view our similar product(s) OR click here to contact our technical support team for suitable replacement.
Product Documentation
PDF
Sample Manual Insert View PDF
PDF
Testing Data View PDF
PDF
Certificate of Analysis (COA) View PDF
PDF
QC Report View PDF
PDF
Material Safety Data Sheet View PDF
PDF
Technical Datasheet View PDF
PDF
Protocol View PDF

Product Overview

Product Name
TMB SENSITIVE, Accessory Reagent
Full Product Name
TMB SENSITIVE
Product Gene Name
Form/Format
Ready To Use
Ready to use TMB solution - liquid
Preparation and Storage
Store at 4 degree C. DO NOT FREEZE. This product is photosensitive and should be protected from light. Avoid exposure to heat and contamination with metal ions or peroxidase. Store in bottles made of High Density Polyethylene (HDPE).
Shelf Life: 48 months from date of despatch.
Intended Use
This item is a high performance TMB (3,3´, 5, 5´- tetramethylbenzidine) solution, recommended for use in ELISA as a substrate for horseradish peroxidase (HRP).

This item contains TMB, substrate buffer and hydrogen peroxide in a safe, ready to use solution. The activity of TMB has been optimised to enable increased sensitivity, minimal background and rapid development.

This item produces a deep blue colour during the enzymatic degradation of H2O2 by horseradish Peroxidase. The reaction may be stopped with 0.25M sulphuric acid, resulting in a yellow colour read at 450nm.This item is more sensitive than other TMB reagents offered by MyBioSource.
Instructions For Use||1. It is recommended that 100ul of this item TMB substrate is used per microtiter well. Pour the desired amount of substrate into a sealed container and allow it to reach room termperature in the dark.
2. Add 100ul of substrate solution per microtiter well.
3. Allow development of the substrate solution. Development time is typically 5-15 minutes. For best results, the plate should be kept in the dark during incubation e.g. wrapped in tinfoil.
4. For kinetic assays, read absorbance at 655nm (blue). For endpoint assays, add an equal volume of 0.25M sulphuric acid and read the absorbance at 450nm (yellow). This endpoint solution is stable for up to one hour.

N.B. If reduced intensity is required, it is recommended that the development time is reduced or the antibody/conjugate is diluted further. (Dilution of This item is not recommended).
Applications Tested/Suitable for TMB accessory reagent
ELISA (EIA)

Other Notes

Small volumes of TMB accessory reagent vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.
Request a Quote

Please fill out the form below and our representative will get back to you shortly.

MBS000000
Contact Us

Please fill out the form below and our representative will get back to you shortly.

MBS000000