Pneumocystis Carinii Antibody – Monoclonal

Monoclonal

IgM/k

3F6

Five slides of Pneumocystis Jirovecii positive tissues, each mounted on Hydrophilic Plus Slides, provided in a plastic mailer

Store at 2-8°C ( Control slides: store at 20-25°C).

For detailed instructions using biodegradable permanent mounting media such as XyGreen PermaMounter or organic solvent based resin such as PermaMounter.

Due to inherent variability present in immunohistochemical procedures (including fixation time of tissues, dilution factor of antibody, retrieval method utilized and incubation time), optimal performance should be established through the use of positive and negative controls.

1. This product contains <0.1% sodium azide (NaN?) as a preservative. Ensure proper handling procedures are used with this reagent.
2. Always wear personal protective equipment such as laboratory coat, goggles and gloves when handling reagents.
3. Dispose of unused solution with copious amount of water.
4. Do not ingest reagent. If reagent is ingested, seek medical advice immediately.
5. Avoid contact with eyes. If contact occurs, flush with large quantities of water.
6. Follow safety precautions of the heating device used for epitope retrieval (TintoRetriever Pressure Cooker or similar).
7. For additional safety information refer to Safety Data Sheet for this product.
8. For complete recommendations for handling biological specimens, please refer to the CDC document, “Guidelines for Safe Work Practices in Human and ADML” (see References in this document).

Pneumocystis jirovecii cysts isolated from human lung.

Membranous

P. Jirovecii infected tissue

Pneumocystis jirovecii is a mouse monoclonal antibody derived from cell culture supernatant that is concentrated, dialyzed, filter sterilized and diluted in buffer pH 7.5, containing BSA and sodium azide as a preservative.

Manufactured in an ISO 13485:2016 Certified Laboratory.