• Call +1.858.633.0165 or Fax +1.858.633.0166 or Contact Us

Cytokeratin 19 (KRT19) Antibody – Mouse Monoclonal

For Research Use Only. Not for use in diagnostic procedures. Catalog #: MBS370300

Cytokeratin 19 is a Type I cytokeratin. Unlike its related family members, this smallest-known acidic cytokeratin is not paired with a basic cytokeratin in epithelial cells. It is specifically found in the periderm, the transiently superficial layer that… More details

$195 / 5 Slides +1 FREE 8GB USB
Product Documentation
PDF
Sample Manual Insert View PDF
PDF
Testing Data View PDF
PDF
Certificate of Analysis (COA) View PDF
PDF
QC Report View PDF
PDF
Material Safety Data Sheet View PDF
PDF
Technical Datasheet View PDF
PDF
Protocol View PDF

Product Overview

Online Datasheet in PDF
Product Name
Cytokeratin 19 (KRT19), Monoclonal Antibody
Full Product Name
Cytokeratin 19
Product Gene Name
Clonality
Monoclonal
Isotype
IgG1/K
Clone Number
BSB-34
Host
Mouse
Species Reactivity
Human
Preparation and Storage
Store at 2-8°C (Control Slides: Store at 20-25°C)
OMIM
148020
Immunogen
A synthetic peptide against N-terminus of human cytokeratin 19 protein.
Localization
Cytoplasmic
Control
Colon, Bladder, Thyroid Carcinoma, Colon Carcinoma
Precautions
1. For professional users only. Results should be interpreted by a qualified medical professional.
2. This product contains <0.1% sodium azide (NaN?) as a preservative. Ensure proper handling procedures are used with this reagent.
3. Always wear personal protective equipment such as laboratory coat, goggles and gloves when handling reagents.
4. Dispose of unused solution with copious amount of water.
5. Do not ingest reagent. If reagent is ingested, seek medical advice immediately.
6. Avoid contact with eyes. If contact occurs, flush with large quantities of water.
7. Follow safety precautions of the heating device used for epitope retrieval (TintoRetriever Pressure Cooker or similar).
8. For additional safety information refer to Safety Data Sheet for this product.
9. For complete recommendations for handling biological specimens, please refer to the CDC document, “Guidelines for Safe Work Practices in Human and AMDL”.
Specimen Preparation
Paraffin sections: The antibody can be used on formalin-fixed paraffin-embedded (FFPE) tissue sections. Ensure tissue undergoes appropriate fixation for best results. Pre-treatment of tissues with heat-induced epitope retrieval (HIER) is recommended using Bio SB ImmunoDNA Retriever with Citrate (BSB 0020-BSB 0023), ImmunoDNA Retriever with EDTA (Inquire) or ImmunoDNA Digestor (Inquire). See reverse side for complete protocol. Tissue should remain hydrated via use of Immuno/DNA Washer solutions (Inquire).
Frozen sections and cell preparations: The antibody can be used for labeling acetone-fixed frozen sections and acetone-fixed cell preparations.
Staining Procedure
1. Cut and mount 3-5 micron formalin-fixed paraffin-embedded tissues on positively charged slides such as Hydrophilic Plus Slides (Inquire).
2. Air dry for 2 hours at 58° C.
3. Deparaffinize, dehydrate and rehydrate tissues.
4. Subject tissues to heat induced epitope retrieval (HIER) using a suitable retrieval solution such as ImmunoDNA Retriever with Citrate (Inquire) or EDTA (Inquire).
5. Any of three heating methods may be used:

a. TintoRetriever Pressure Cooker or Equivalent
Place tissues/slides in a staining dish or coplin jar containing the ImmunoDNA Retriever with Citrate or EDTA, and place on trivet in the pressure cooker. Add 1-2 inches of distilled water to the pressure cooker and turn heat to high. Incubate for 15 minutes. Open and immediately transfer slides to room temperature.
b. TintoRetriever PT Module or Water Bath Method
Place tissues/slides in a pre-warmed staining dish or coplin jar containing the ImmunoDNA Retriever with Citrate or EDTA at 95°-99° C. Incubate for 30-60 minutes.
c. Conventional Steamer Method
Place tissues/slides in a pre-warmed staining dish or coplin jar containing the ImmunoDNA Retriever with Citrate or EDTA in a steamer, cover and steam for 30-60 minutes.

6. After heat treatment, transfer slides in ImmunoDNA Retriever with Citrate or EDTA to room temperature and let stand for 15-20 minutes.
7. For manual staining, perform antibody incubation at ambient temperature. For automated staining methods, perform antibody incubation according to instrument manufacturer’s instructions.
8. Wash slides with ImmunoDNA washer or DI water.
9. Continue IHC staining protocol. Wash slides between each step with ImmunoDNA washer solution.
Mounting Protocols
For detailed instructions using biodegradable permanent mounting media such as XyGreen PermaMounter or organic solvent based resin such as PermaMounter contact Customer Service.
Product Limitations
Due to inherent variability present in immunohistochemical procedures (including fixation time of tissues, dilution factor of antibody, retrieval method utilized and incubation time), optimal performance should be established through the use of positive and negative controls. Results should be interpreted by a qualified medical professional.
ISO Certification
Manufactured in an ISO 13485:2016 Certified Laboratory.

Dilution Information of anti-KRT19 antibody

Mouse Anti-KRT19 Monoclonal Antibody – Cat# MBS370300

Immunohistochemistry (IHC) of anti-KRT19 antibody

IHC of Cytokeratin 19 on an FFPE Thyroid Carcinoma Tissue
Mouse Anti-KRT19 Monoclonal Antibody, Immunohistochemistry (IHC) – Cat# MBS370300

Testing Data of anti-KRT19 antibody

Performance Characteristics
Mouse Anti-KRT19 Monoclonal Antibody, Testing Data – Cat# MBS370300

Other Notes

Small volumes of anti-KRT19 antibody vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.

Searchable Terms for KRT19 purchase

MBS370300 is an antibody targeting KRT19. Also known as Cytokeratin 19. Reactive in Human. Host: Mouse.

Additional Details

NCBI/Uniprot data below describe general gene information for KRT19. It may not necessarily be applicable to this product.

NCBI GI #
NCBI Accession #
UniProt Secondary Accession #
NCBI Official Full Name
cytokeratin 19, partial
UniProt Protein Name
Keratin, type I cytoskeletal 19
UniProt Synonym Protein Names
Cytokeratin-19; CK-19; Keratin-19; K19
Protein Family
UniProt Gene Name
KRT19
UniProt Synonym Gene Names
CK-19; K19
UniProt Entry Name
K1C19_HUMAN

UniProt Comments for KRT19

K19: a type I cytoskeletal keratin. The keratins are intermediate filament proteins responsible for the structural integrity of epithelial cells and are subdivided into cytokeratins and hair keratins. Keratin 19 differs from all other IF proteins in lacking the C-terminal tail domain. Unlike its related family members, this smallest known acidic cytokeratin is not paired with a basic cytokeratin in epithelial cells. It is specifically expressed in the periderm, the transiently superficial layer that envelopes the developing epidermis.

Protein type: Cytoskeletal

Chromosomal Location of Human Ortholog: 17q21.2

Cellular Component: costamere; dystrophin-associated glycoprotein complex; intermediate filament; plasma membrane; sarcolemma; Z disc

Molecular Function: protein binding; protein complex binding; structural constituent of cytoskeleton; structural constituent of muscle

Biological Process: Notch signaling pathway; response to estrogen stimulus; sarcomere organization; viral reproduction
Show more

Precautions

All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.

Disclaimer

While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.

It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.

Product Note

Select online data sheet information is drawn from bioinformatics databases, occasionally resulting in ambiguous or non-relevant product information. It is the responsibility of the customer to review, verify, and evaluate the information to make sure it matches their requirements before purchasing the kit. Our ELISA Kit assays are dynamic research tools and sometimes they may be updated and improved. If the format of this assay is important to you then please request the current manual or contact our technical support team with a presales inquiry before placing an order. We will confirm the current details of the assay. We cannot guarantee the sample manual posted online is the most current manual, it is intended to serve as an example only. Please refer to the instructions For Use provided with the assay kit for precise details.
Request a Quote

Please fill out the form below and our representative will get back to you shortly.

MBS000000
Contact Us

Please fill out the form below and our representative will get back to you shortly.

MBS000000