• Call +1.858.633.0165 or Fax +1.858.633.0166 or Contact Us

BCOR Antibody – Mouse Monoclonal

For Research Use Only. Not for use in diagnostic procedures. Catalog #: MBS370378

BCOR is located on chromosome X, in the Xp11.4 locus, and derives its name from its function as an interacting corepressor of BCL-6 that enhances BCL-6-mediated transcriptional repression. BCOR is a gene that encodes for an epigenetic regulator involved in… More details

$195 / 5 Slides +1 FREE 8GB USB
Product Documentation
PDF
Sample Manual Insert View PDF
PDF
Testing Data View PDF
PDF
Certificate of Analysis (COA) View PDF
PDF
QC Report View PDF
PDF
Material Safety Data Sheet View PDF
PDF
Technical Datasheet View PDF
PDF
Protocol View PDF

Product Overview

Online Datasheet in PDF
Product Name
BCOR, Monoclonal Antibody
Full Product Name
BCOR, MMab
Product Gene Name
Clonality
Monoclonal
Isotype
IgG1/K
Clone Number
BSB-128
Host
Mouse
Species Reactivity
Paraffin, Frozen
Form/Format
Concentrate or Prediluted
Preparation and Storage
Store at 2-8°C. (Control Slides: Store at 20-25°C)
Immunogen
Synthetic peptide corresponding to residues of the N-terminus of the human BCOR protein.
Localization
Nuclear
Control
Testis, Cervix, Prostate, TCC, Angiosarcoma
Precautions
1. This product contains <0.1% sodium azide (NaN3) as a preservative. Ensure proper handling procedures are used with this reagent.
2. Always wear personal protective equipment such as a laboratory coat, goggles, and gloves when handling reagents.
3. Dispose of unused solution with copious amounts of water.
4. Do not ingest reagent. If reagent is ingested, seek medical advice immediately.
5. Avoid contact with eyes. If contact occurs, flush with large quantities of water.
6. Follow safety precautions of the heating device used for epitope retrieval (TintoRetriever Pressure Cooker or similar).
7. For additional safety information refer to Safety Data Sheet for this product.
8. For complete recommendations for handling biological specimens, please refer to the CDC document,“Guidelines for Safe Work Practices in Human and AMDL" (see References in this document).
Intended Use
This antibody is intended for use in Immunohistochemical applications on formalin-fixed paraffin-embedded tissues (FFPE), frozen tissue sections and cell preparations. Interpretation of results should be performed by a qualified medical professional.
Specimen Preparation
Paraffin sections: The antibodycan be used on formalin-fixed paraffin-embedded (FFPE) tissue sections. Ensure tissue undergoes appropriate fixation for best results. Pre-treatment of tissues with heat-induced epitope retrieval (HIER) is recommended using ImmunoDNA Retriever with Citrate, ImmunoDNA Retriever with EDTA, or ImmunoDNA Digestor. See reverse side for complete protocol. Tissue should remain hydrated via use of Immuno/DNAWasher solutions.
Frozen sections and cell preparations
The antibody can be used on acetone-fixed frozen sections and acetone-fixed cell preparations.
IHC Protocol
1. Cut and mount 3-5 micron formalin-fixed paraffin-embedded tissues on positivelycharged slides such as Hydrophilic Plus Slides.
2. Air dryfor 2 hours at 58° C.
3. Deparaffinize, dehydrate, and rehydrate tissues.
4. Subject tissues to heat induced epitope retrieval (HIER) using a suitable retrieval solution such as ImmunoDNA Retriever with Citrate or EDTA.
5. Any of three heating methods may be used:
a.TintoRetriever Pressure Cooker or Equivalent
Place tissues/slides in a staining dish or coplin jar containing the ImmunoDNA Retriever with Citrate or EDTA and place on trivet in the pressure cooker. Add 1-2 inches of distilled water to the pressure cooker and turn heat to high. Incubate for 15 minutes. Open and immediately transfer slides to room temperature.
b.TintoRetriever PT Module or Water Bath Method
Place tissues/slides in a pre-warmed staining dish or coplin jar containing the ImmunoDNA Retriever with Citrate or EDTA at 95°-99° C. Incubate for 30-60 minutes.
c. Conventional Steamer Method
Place tissues/slides in a pre-warmed staining dish or coplin jar containing the ImmunoDNA Retriever with Citrate or EDTA in a steamer, cover and steam for 30-60 minutes.6. After heat treatment, transfer slides in ImmunoDNA Retriever with Citrate or EDTA to room temperature and let stand for 15-20 minutes.
7. For manual IHC, perform antibodyincubation at ambient temperature. For automated IHC methods, perform antibodyincubation according to instrument manufacturer’s instructions.
8.Wash slides with ImmunoDNA washer or DI water.
9. Continue IHC protocol.Wash slides between each step with ImmunoDNA washer solution.
ISO Certification
Manufactured in an ISO 13485:2016 Certified Laboratory.
Applications Tested/Suitable for anti-BCOR antibody
Immunohistochemistry (IHC) Frozen/Paraffin
Application Notes for anti-BCOR antibody
Sarcoma & Soft tissue

Dilution Information of anti-BCOR antibody

Mouse Anti-BCOR Monoclonal Antibody – Cat# MBS370378

Immunohistochemistry (IHC) of anti-BCOR antibody

BCOR on a FFPE Cervix Tissue
Mouse Anti-BCOR Monoclonal Antibody, Immunohistochemistry (IHC) – Cat# MBS370378

Testing Data (TD) of anti-BCOR antibody

Mouse Anti-BCOR Monoclonal Antibody, Testing Data (TD) – Cat# MBS370378

Other Notes

Small volumes of anti-BCOR antibody vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.

Searchable Terms for BCOR purchase

MBS370378 is an antibody targeting BCOR. Also known as BCOR, MMab. Reactive in Paraffin, Frozen. Host: Mouse.

Additional Details

NCBI/Uniprot data below describe general gene information for BCOR. It may not necessarily be applicable to this product.

NCBI GI #
NCBI GeneID
UniProt Related Accession #
NCBI Official Full Name
BCOR protein
NCBI Official Synonym Full Names
BCL6 corepressor
NCBI Official Symbol
BCOR
NCBI Official Synonym Symbols
MAA2; ANOP2; MCOPS2
Protein Family
NCBI Protein Information
BCL-6 corepressor

NCBI Summary for BCOR

The protein encoded by this gene was identified as an interacting corepressor of BCL6, a POZ/zinc finger transcription repressor that is required for germinal center formation and may influence apoptosis. This protein selectively interacts with the POZ domain of BCL6, but not with eight other POZ proteins. Specific class I and II histone deacetylases (HDACs) have been shown to interact with this protein, which suggests a possible link between the two classes of HDACs. Several transcript variants encoding different isoforms have been found for this gene. A pseudogene of this gene is found on chromosome Y.[provided by RefSeq, Jun 2010]
Show more

Precautions

All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.

Disclaimer

While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.

It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.

Product Note

Select online data sheet information is drawn from bioinformatics databases, occasionally resulting in ambiguous or non-relevant product information. It is the responsibility of the customer to review, verify, and evaluate the information to make sure it matches their requirements before purchasing the kit. Our ELISA Kit assays are dynamic research tools and sometimes they may be updated and improved. If the format of this assay is important to you then please request the current manual or contact our technical support team with a presales inquiry before placing an order. We will confirm the current details of the assay. We cannot guarantee the sample manual posted online is the most current manual, it is intended to serve as an example only. Please refer to the instructions For Use provided with the assay kit for precise details.
Request a Quote

Please fill out the form below and our representative will get back to you shortly.

MBS000000
Contact Us

Please fill out the form below and our representative will get back to you shortly.

MBS000000