• Call +1.858.633.0165 or Fax +1.858.633.0166 or Contact Us

WWE Protein

For Research Use Only. Not for use in diagnostic procedures. Catalog #: MBS376021

Background: WWE Affinity Resin and Negative Control Resin are designed for the isolation and study of poly-ADP-ribosylated (PARylated) proteins. Through the use of this highly specific PAR affinity resin, PARylated proteins are isolated from cell or tissue… More details

DISCONTINUED
Click here to view our similar product(s) OR click here to contact our technical support team for suitable replacement.
Product Documentation
PDF
Sample Manual Insert View PDF
PDF
Testing Data View PDF
PDF
Certificate of Analysis (COA) View PDF
PDF
QC Report View PDF
PDF
Material Safety Data Sheet View PDF
PDF
Technical Datasheet View PDF
PDF
Protocol View PDF

Product Overview

Product Name
WWE, Protein
Full Product Name
WWE Affinity Resin Set
Form/Format
Each vial contains 0.5mg purified GST-WWE fusion protein bound to 50-75ìL packed volume of glutathione beads in 0.5 mL buffer containing 10 mM sodium phosphate, pH 7.4, 150 mM NaCl, 1 mM EDTA, 1% Triton X-100, and 0.02% sodium azide.
Purity/Purification
GST-WWE fusion protein, purity >95% by SDSPAGE
Preparation and Storage
Stable for 6 months from date of shipment when stored at 4°C. DO NOT FREEZE!
Additional Notes
The WWE Neg Control Resin (MBS376023) has been shown to bind to purified highly automodified PARP1 under certain conditions.
Materials Required
Lysis buffer (e.g.: 50mM Tris, pH 8, 200mM NaCl, 1mM EDTA, 1% Triton X-100, 10% glycerol, 1 mM DTT, 0.1% SDS, and protease inhibitors)
Cell/tissue extract containing ~0.15 to 1mg total protein per sample
Microcentrifuge tubes
Microcentrifuge
SDS-PAGE sample buffer
Procedure
1. HEK293 cells were grown to confluence on 10 cm plates.
2. Cells were harvested at 4°C in 1 mL Lysis buffer (50mM Tris, pH 8, 200mM NaCl, 1mM EDTA, 1% Triton X-100, 10% glycerol, 1 mM DTT, 0.1% SDS, and protease inhibitors).
3. After clarification by centrifugation at 15k x g for 10 min, cell lysates (~0.25mL) were incubated with WWE affinity resin (MBS376022) or neg control resin (MBS376023) (20µL suspended resin; see Suggested General Protocol) with agitation at 4°C overnight.
4. Resins were sedimented with associated proteins in a microfuge at 15k x g for 10 sec, and supernatant discarded.
5. Resin was washed 4-times with 500µL Lysis buffer.
6. 100µL SDS-PAGE sample buffer was added to each tube then samples boiled for 10 min.
7. SDS-PAGE and Western blotting of samples were performed. Immunoblots were probed with anti-PARP1 and anti-TNKS antibodies, and detected using ECL.
Applications Tested/Suitable for WWE protein
Western Blot (WB), Immunoblot (IB)
Application Notes for WWE protein
Use 20uL (20ug) suspended resin to affinity purify/pull-down poly-ADP-ribose modified proteins in 0.15-1mg cell and tissue extracts. Analyze by Western blotting using protein-specific antibodies to probe the immunoblot. Each 0.5mL vial is sufficient for analysis of ~25 samples.
Optimal experimental conditions must be determined by the user.

Testing Data of WWE protein

Isolation of PARsylated PARP1 and TNKS1 using WWE resin. WWE and neg control resins were used to pull down PARsylated proteins from clarified extracts of confluent HEK293 cells. The resin bound proteins were Western blotted and probed with either anti-TNKS1 or PARP1
WWE Protein – Cat# MBS376021

Product References and Citations for WWE protein

H.C. Kang et al. (2011) PNAS 108 14103 Y. Zhang et al. (2011) Nature Cell Biol. 13 623 M.G. Callow et al. (2011) PLoS ONE 6 e22595 S.A. Andrabi et al. (2011) Nature Medicine 17 692 Z.D. Zhou et al. (2011) Cell Adh. Migr. 5 463 Z. Wang et al. (2012) Genes & Dev. 26 235

Other Notes

Small volumes of WWE protein vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.

Searchable Terms for WWE purchase

MBS376021 is a protein targeting WWE. Also known as WWE Affinity Resin Set.

Additional Details

NCBI/Uniprot data below describe general gene information for WWE. It may not necessarily be applicable to this product.

Precautions

All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.

Disclaimer

While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.

It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.

Product Note

Select online data sheet information is drawn from bioinformatics databases, occasionally resulting in ambiguous or non-relevant product information. It is the responsibility of the customer to review, verify, and evaluate the information to make sure it matches their requirements before purchasing the kit. Our ELISA Kit assays are dynamic research tools and sometimes they may be updated and improved. If the format of this assay is important to you then please request the current manual or contact our technical support team with a presales inquiry before placing an order. We will confirm the current details of the assay. We cannot guarantee the sample manual posted online is the most current manual, it is intended to serve as an example only. Please refer to the instructions For Use provided with the assay kit for precise details.
Request a Quote

Please fill out the form below and our representative will get back to you shortly.

MBS000000
Contact Us

Please fill out the form below and our representative will get back to you shortly.

MBS000000