Presentation
1.0 ml, 5.0 ml lyophilized
Sterility
This reagent is not sold as sterile, but can be sterilized by filtration if necessary. To minimize loss of volume during filtration, dilute to the final working concentration in the appropriate medium before filtration and filter through a 0.22um filter.
Specifications
Immunizing Strain: BALB/c
Heat Inactivation: 60 minutes at 56°C
Absorption: Mouse erythrocyes/hepatocytes
Lot Specifications
Antiserum Titration:
Cell Source: Spleen, Thymus
Donors: BALB/c
Cell Concentration: 1.1x106 cells per ml
Complement: Low-Tox-M Rabbit Complement
Complement Concentration: 1:10
Procedure: Two stage cytotoxicity as described on Recommended Method for Determining Percent Cytotoxicity with Anti-Mouse Lymphocyte Serum Plus Complement.
Tissue Distribution
Procedure: As above
Antiserum Concentration: 1:40
Strain: BALB/c
Cell Source/C.I.
Thymus: 100.0
Spleen: 50.0
Lymph Node: 95.0
Bone Marrow: 81.0
Antiserum dilution that results in 50% cytotoxicity against thymus cells: ~1:1350
Strain Distribution
Target Cell: Thymus
Procedure: As above
Strains Tested (+/-)
C57BL/6: -
C3H/He: -
ATH: -
A.TL: -
CBA: -
BALB/c: +
Functional Testing
Cell Source: Splenocytes and Thymocytes
Cell Concentration: 1x106 cells/ml.
Antiserum Concentration: 1:10
Complement: Low-Tox-M at 1:10
Donors: BALB/c
Procedure
Cells were treated as described in "Recommended Method for Depleting A Cell Population of Mouse Lymphocytes." The remaining viable cells were exposed to the mitogens Concanavalin A (CON A), Phytohaemagglutinin (PHA), and Lipopolysaccharide (LPS). Cell depletionwith Anti-Mouse Lymphocyte Serum was found to inhibit the CON A, PHA,and LPS responses. Treatment of mouse splenocytes with Anti-Mouse Lymphocyte Serum plus complement essentially eliminated in vitro T effector cell function.
Recommended Method For Depleting A Cell Population Of Mouse Lymphocytes
1. Prepare a cell suspension from the appropriate tissue in Cytotoxicity Medium or equivalent. Remove red cells and dead cells (where necessary) by purification of viable lymphocytes on Lympholyte-M2 density cell separation medium. After washing, adjust the cell concentration to 1x106 cells per ml in Cytotoxicity Medium.
2. Add the antiserum to a final concentration of 1:40 and mix.
3. Incubate for 60 minutes at 4°C.
4. Centrifuge to pellet the cells and discard the supernatant.
5. Resuspend to the original volume in Low-Tox-M3 Rabbit Complement, diluted to the appropriate concentration in Cyotoxicity Medium. (Recommended concentration included with each batch of Low-Tox-M Complement)
6. Incubate for 60 minutes at 37°C.
7. Monitor for percent cytotoxicity at this stage, before further processing. For this purpose remove a small sample from each tube, dilute 1:10 with medium, and add 1/10 volume of 1% Trypan Blue. After 3-5 minutes, score live versus dead cells in a hemacytometer.
8. For functional studies, remove the dead cells from the treated groups before further processing, particularly if the treated cells are to be cultured. Layering the suspension on cell separation medium and centrifuging at room temperature as per the instructions provided can do this. Live cells will form a layer at the interface, while dead cells pellet.The interface can then be collected and washed in Cytotoxicity Medium before being resuspended in the appropriate medium for further processing.
Alternatively, the cells can then be washed and resuspended in the appropriate medium for further processing immediately after Step #6, provided that the dead cells will not interfere with subsequent assays.
Recommended Method For Determining Percent Cytotoxicity With Anti-Mouse Lymphocyte Serum Plus Complement
1. Prepare a cell suspension from the appropriate tissue in Cytotoxicity Medium or equivalent. Remove red cells and dead cells (where necessary) by purification of viable lymphocytes on Lympholyteo-M2 density cell separation medium. After washing, adjust the cell concentration to 1.1 x 106 cells per ml in Cytotoxicity Medium.
2. Add the antiserum to a final concentration of 1:40 and mix.
3. Incubate for 60 minutes at 4°C.
4. Centrifuge to pellet the cells and discard the supernatant.
5. Resuspend to the original volume in Low-Tox-M Rabbit Complement3 diluted to the appropriate concentration in Cyotoxicity Medium. (Recommended concentration included with each batch of Low-Tox-M Rabbit Complement ~ 1:10 - 1:25)
6. Incubate for 60 minutes at 37°C.
7. Place on ice.
8. Add Trypan Blue. 10% by volume of 1%Trypan blue (w/v) added 3-5 minutes before scoring works well. Score live versus dead cells in a hemacytometer.
Cyotoxic index (C.I.) can be calculated as follows:
C.I. = % cyt (antibody + complement) - % cvt (complement alone)/100% - % cyt (complement alone) x 100