• Call +1.858.633.0165 or Fax +1.858.633.0166 or Contact Us

1,10-Decadiyl Bismethanethiosulfonate (MTS-10-MTS)

For Research Use Only. Not for use in diagnostic procedures. Catalog #: MBS6023475

MBS6023475 is a biochemical targeting 1,10-Decadiyl Bismethanethiosulfonate. Also known as 1,10-Decadiyl Bismethanethiosulfonate (MTS-10-MTS). A sulfhydryl cross-linking reagent More details

$610 / 25 mg +1 FREE 8GB USB
Product Documentation
PDF
Sample Manual Insert View PDF
PDF
Testing Data View PDF
PDF
Certificate of Analysis (COA) View PDF
PDF
QC Report View PDF
PDF
Material Safety Data Sheet View PDF
PDF
Technical Datasheet View PDF
PDF
Protocol View PDF

Product Overview

Online Datasheet in PDF
Product Name
1,10-Decadiyl Bismethanethiosulfonate, Biochemical
Full Product Name
1,10-Decadiyl Bismethanethiosulfonate (MTS-10-MTS)
Purity/Purification
~90%
Preparation and Storage
May be stored at RT for short-term only. Long-term storage is recommended at -20 degree C. For maximum recovery of product, centrifuge the original vial prior to removing the cap. Moisture and Temperature Sensitive
Some methanethiosulfonates are hygroscopic and all hydrolyze in water, over a period of time, particularly in the presence of nucleophiles. They should be stored in a desiccator at minus 20 degree C and warmed up to room temperature before opening the vial. For maximum results, solutions should be made up immediately prior to use even though solutions in distilled water appear to be stable for hours at 4 degree C.
At pH 7.5 and room temperature, MTSEA hydrolyzes with a half-life of about 15 minutes, MTSET hydrolyzes with a half-life of 10 minutes, and MTSES hydrolyzes with a half-life of 20 minutes. Routinely, one can use 2.5mM MTSEA, 1mM MTSET, or 10mM MTSES, applied for 1 to 5 minutes. (MTSET is 2.5 times as reactive with small sulfhydryl compounds as is MTSEA, and 10 times as reactive as MTSES). (Stauffer and Karlin, 1994; Karlin, personal communication).
For application to Xenopus Oocytes, dissolve the compounds in 115mM NaCl, 2.5mM KCl, 1.8mM MgCl2, 10mM Hepes, pH 7.5 with NaOH. MTS reagents decompose in buffer very quickly.
•DMSO is a good solvent for the MTS reagents which are not water soluble (i.e. the non-charged MTS reagents).
Molecular Weight
362.59
CAS Number
56-02-0
Molecular Formula
C12H26O4S4
Melting Point
91-93ºC
Method for Determining Identity
Proton NMR Spectroscopic and Mass Spectrometric Analysis
Solubility
Chloroform
TLC Conditions
SiO2; Hexne: Ethyl Acetate: 1:1; Visualized with AMCS; Rf=0.5
Toxicity and Hazards
Due to the potential danger associated with the use of some of MyBioSource biochemicals, all products should be handled by qualified personnel only, trained in laboratory procedures, and familiar with potential hazards. Information is not available on the possible hazards of many experimental compounds. The absence of a warning must not be interpreted as indication of safety. The ultimate responsibility for the proper handling of any and all chemicals lies with the user. All goods sold by MyBioSource carry the condition that liability for any injury, loss or damage whatsoever to persons or real property resulting from the handling of the said goods lies with the user. Acceptance of our goods binds the customer to these terms.

Structure of 1,10-Decadiyl Bismethanethiosulfonate biochemical

Structure of D1825.
1,10-Decadiyl Bismethanethiosulfonate (MTS-10-MTS) Biochemical – Cat# MBS6023475

Other Notes

Small volumes of 1,10-Decadiyl Bismethanethiosulfonate biochemical vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.
Request a Quote

Please fill out the form below and our representative will get back to you shortly.

MBS000000
Contact Us

Please fill out the form below and our representative will get back to you shortly.

MBS000000