• Call +1.858.633.0165 or Fax +1.858.633.0166 or Contact Us

Urea Transporter 2 (SLC14A2) Antibody – Rabbit Polyclonal

For Research Use Only. Not for use in diagnostic procedures. Catalog #: MBS613911

Urea is the major end product of nitrogen metabolism and it is concentrated up to four times higher than that of plasma. A rapid, passive transport of urea through the membranes of the IMCD is responsible for generation of high urea concentration in the inner… More details

$980 / 0.1 mg +1 FREE 8GB USB
Product Documentation
PDF
Sample Manual Insert View PDF
PDF
Testing Data View PDF
PDF
Certificate of Analysis (COA) View PDF
PDF
QC Report View PDF
PDF
Material Safety Data Sheet View PDF
PDF
Technical Datasheet View PDF
PDF
Protocol View PDF

Product Overview

Online Datasheet in PDF
Product Name
Urea Transporter 2 (SLC14A2), Polyclonal Antibody
Full Product Name
Anti - Urea Transporter 2 (rUT2)
Product Gene Name
Product Synonym Names
Urea Transporter 2 (rUT2)
Clonality
Polyclonal
Isotype
IgG
Host
Host: Rabbit
Source: Rat
Species Reactivity
Rat
Form/Format
Affinity Purified
Supplied as a liquid in PBS, pH 7.4 and 0.1% sodium azide, 40% glycerol.
Purity/Purification
Purified by immunoaffinity chromatography.
Specificity
The 19 AA rUT2 peptide is 89% homologous with human UT2 (17/19 AA; with 2 conservative replacement). It is 84% homologous with rabbit UT2 (16/19 AA; with 2 conservative and 1 non-conservative changes). Actual crossreactivity of anti-rat UT2 with other species is not known. Control peptides, because of their low MW (<3kD), are not suitable for Western. It should be used for ELISA or antibody blocking to confirm antibody specificity
Preparation and Storage
May be stored at 4 degree C for short-term only. For long-term storage and to avoid repeated freezing and thawing, aliquot and add glycerol (40-50%). Freeze at -20 degree C. Aliquots are stable for at least 12 months at -20 degree C. For maximum recovery of product, centrifuge the original vial after thawing and prior to removing the cap. Further dilutions can be made in assay buffer..
We recommend the use of 0.5-1% milk in all primary/secondary antibody-enzyme conjugate incubations in order to suppress non-specific bands.
Molecular Weight
101,209 Da
Chromosome Location
Chromosome: 18; NC_000018.9 (43194766..43263072). Location: 18q12.1-q21.1
OMIM
601611
3D Structure
ModBase 3D Structure for Q15849
Immunogen
A 19 AA peptide sequence near the C-terminus of rat UT2. This peptide is predicted to be cytoplasmic (1). A Cysteine was added at the C-terminus for conjugation to KLH

Product Categories/Family for anti-SLC14A2 antibody

Applications Tested/Suitable for anti-SLC14A2 antibody
ELISA, Western Blot
Application Notes for anti-SLC14A2 antibody
Suitable for use in ELISA, Western Blotting. Other applications not tested.
Dilution: Western Blotting : (1:1000-1:5000 for neat serum and 1-10ug/ml for affinity pure antibody using ECL. An antibody made to the rUT2 peptide detected a major band at ~97kD in rat renal inner medulla membranes (2). The open reading frames of the cDNA clones for rabbit and rat UT2 predicted a protein of only ~43kD (1-3). However, northern blots using these cDNAs revealed 2 distinct transcripts (2.9 and 4 kb) (4). The 97kD band correspond to the 4 kb transcript (2).
ELISA: 1:10,000-50,000 for neat serum and 0.5-1ug/ml for affinity pure. Control peptide can be used to coat ELISA plates at 1ug/ml.
Optimal dilutions to be determined by the researcher.

Product References and Citations for anti-SLC14A2 antibody

• 1. Smith, CP et al (1995) J. Clin. Invest. 96:1556-1563.
• 2. Nielsen, S et al (1996) Proc. Natl. Acad. Sci. 93:5495-5500.
• 3. You, G et al (1993) Nature 365:844-847.

Other Notes

Small volumes of anti-SLC14A2 antibody vial(s) may occasionally become entrapped in the seal of the product vial during shipment and storage. If necessary, briefly centrifuge the vial on a tabletop centrifuge to dislodge any liquid in the container`s cap. Certain products may require to ship with dry ice and additional dry ice fee may apply.

Searchable Terms for SLC14A2 purchase

MBS613911 is an antibody targeting SLC14A2. Also known as Anti - Urea Transporter 2 (rUT2). Reactive in Rat. Host: Rabbit
Source: Rat.

Additional Details

NCBI/Uniprot data below describe general gene information for SLC14A2. It may not necessarily be applicable to this product.

NCBI GI #
NCBI GeneID
NCBI Accession #
UniProt Primary Accession #
UniProt Secondary Accession #
UniProt Related Accession #
GenBank Nucleotide #
NCBI Official Full Name
urea transporter 2
NCBI Official Synonym Full Names
solute carrier family 14 (urea transporter), member 2
NCBI Official Symbol
SLC14A2
NCBI Official Synonym Symbols
UT2; UTA; UTR; HUT2; UT-A2; hUT-A6; FLJ16167; MGC119566; MGC119567
UniProt Protein Name
Urea transporter 2
UniProt Synonym Protein Names
Solute carrier family 14 member 2; Urea transporter, kidney
Protein Family
UniProt Gene Name
SLC14A2
UniProt Synonym Gene Names
HUT2; UT2
UniProt Entry Name
UT2_HUMAN
NCBI Protein Information
urea transporter 2; OTTHUMP00000163451; urea transporter-2; urea transporter, kidney; solute carrier family 14 member 2

Precautions

All of MyBioSource's Products are for scientific laboratory research purposes and are not for diagnostic, therapeutics, prophylactic or in vivo use. Through your purchase, you expressly represent and warrant to MyBioSource that you will properly test and use any Products purchased from MyBioSource in accordance with industry standards. MyBioSource and its authorized distributors reserve the right to refuse to process any order where we reasonably believe that the intended use will fall outside of our acceptable guidelines.

Disclaimer

While every efforts were made to ensure the accuracy of the information provided in this datasheet, MyBioSource will not be liable for any omissions or errors contained herein. MyBioSource reserves the right to make changes to this datasheet at any time without prior notice.

It is the responsibility of the customer to report product performance issues to MyBioSource within 30 days of receipt of the product. Please visit our Terms & Conditions page for more information.

Product Note

Select online data sheet information is drawn from bioinformatics databases, occasionally resulting in ambiguous or non-relevant product information. It is the responsibility of the customer to review, verify, and evaluate the information to make sure it matches their requirements before purchasing the kit. Our ELISA Kit assays are dynamic research tools and sometimes they may be updated and improved. If the format of this assay is important to you then please request the current manual or contact our technical support team with a presales inquiry before placing an order. We will confirm the current details of the assay. We cannot guarantee the sample manual posted online is the most current manual, it is intended to serve as an example only. Please refer to the instructions For Use provided with the assay kit for precise details.

Product PubMed Publications

Request a Quote

Please fill out the form below and our representative will get back to you shortly.

MBS000000
Contact Us

Please fill out the form below and our representative will get back to you shortly.

MBS000000