Antibody Pairs Support Pack 1 Reagent

Streptavidin-HRP should be stored at -20 degree C, others are valid for 6 months at 4 degree C. Store diluted (reconstituted powder) or working solutions at 4 degree C for up to one week for use in subsequent experiments.

Manufactured in a lab with traceable raw materials. Bulk orders can typically be prepared to the customer’s specifications, please inquire.

Coating Buffer - 1 bottle of powder
Blocking Buffer - 1 bottle of powder
Standard Diluent - 1 bottle of powder
Detection Antibody Diluent - 1 bottle of powder
Streptavidin-HRP Diluent - 1 bottle of powder
Wash Buffer - 1 bottle of powder
Streptavidin-HRP 1 bottle - 0.6 mL
Substrate Solution 1 bottle - 48 mL each
Stop Solution 1 bottle - 30 mL each

Coating Buffer - Used for coating antibody on the wells of 96-well strip plate. Prepare a working solution by diluting the Coating Buffer with deionized or distilled water before the experiment. 1 bottle of Coating Buffer can be used for preparing 220mL working solution.
Blocking Buffer - Used for blocking of unspecific binding sites of the plate. Prepare a working solution by diluting the Blocking Buffer with deionized or distilled water before the experiment. 1 bottle of Blocking Buffer can be used for preparing 120mL working solution.
Standard Diluent - Used for dilution of Standard. Prepare a working solution by diluting the Standard Diluent reagent with deionized or distilled water before the experiment. 1 bottle of Standard Diluent can be used for preparing 80mL working solution.
Detection Antibody Diluent - Used for dilution of Detection Antibody. Prepare a working solution by diluting the Detection Antibody Diluent reagent with deionized or distilled water before the experiment. 1 bottle of Detection Antibody Diluent can be used for preparing 60mL working solution.
Streptavidin-HRP Diluent - Used for dilution of Streptavidin-HRP. Prepare a working solution by diluting the Streptavidin-HRP Diluent with deionized or distilled water before the experiment. 1 bottle of Streptavidin-HRP Diluent can be used for preparing 60mL working solution.
Wash Buffer - For plate washing. Prepare a working solution by diluting the Wash Buffer with deionized or distilled water before the experiment. 1 bottle of Wash Buffer can be used for preparing 2000mL working solution.
Streptavidin-HRP - Steptavidin-HRP can specifically bind biotinylated antibodies. Prepare a working solution by diluting the Streptavidin-HRP with Streptavidin-HRP Diluent working solution. The dilution ratio was 1:100. 1 bottle can be used for preparing 60mL working solution.
Substrate Solution - Used for chromogenic substrate.
Stop Solution - Used for stopping chromogenic reaction.

Appropriate care should be exercised when using these reagents, including gloves, glasses, lab coats, and good laboratory procedures.

Manufactured in an ISO 9001:2015 and ISO 13485:2016 Certified Laboratory.